Excellence in level and flow measurement.

UK +44 (0)1684 891 371
USA +1 850 279 4882
Malaysia +60 (0)126 420 453



Sensor Float 800-60 

Control switch for potable water and sewage

Sensor Float 800-60

A mercury activated, narrow angle control switch designed to accurately activate pump control panels and alarms. There is a smaller version for control in confined spaces. Switches currents up to 5A AC. Switch operating range typically ±1cm from horizontal. Pump up, pump down or SPDT versions are available with pipe clamp, internal weight (not SPDT) or cable options. The float is 8.6cm dia x 11.6cm and is manufactured from PVC.


Sensor Float sales data Sensor Float manual Sensor Float case studies

Full listing of Pulsar user manuals.

Applications:

  • Monitoring liquids in potable water, water and sewage applications
  • Point liquid level measurement
800-60 Sensor Float
Cable Flexible 18 gauge, 2 conductor, water-resistant (SPDT version uses 3-core cable)
Float 8.58cm diameter x 11.56cm (3.38 x 4.55in) - standard & SPDT
7.14cm diameter x 8.68cm (2.81 x 3.42in) - mini
High impact, corrosion resistant, PVC housing for use in sewage and non-potable water
Operating temperature range Water up to 60ºC (140ºF)
Max. water depth 9m (30ft) or 13psi
Mercury tilt switch Single pole, single throw mercury to mercury contacts (standard & mini)
Single pole, double throw mercury to mercury contacts (SPDT)
Hermetically sealed in a steel capsule and epoxy sealed in the float housing
Electrical rating 5A @ 120/230 V AC 50/60 Hz (standard & mini)
13A @ 120/230 V AC 50/60 Hz (SPDT)
The mini version is suitable for controlling electrical loads < 30mA @ 12V AC or non arcing electrical loads.
This equipment is suitable for IEC 664 category II installations and is protected by double insulation