Pulsar Fixed Angle Transducer Bracket
Fixed angle bracket made from steel with a BZP (bright zinc passivate) coat. Ideal for mounting against a wall where there is an under-hang under a manhole or similar. 2 x 14mm holes allow rigid fixing into a vertical surface using suitable bolts.
65mm (2.56in) reach p/n dBA0004
Bracket size is 100L x 100W x 150Hmm (3.9L x 3.9W x 5.9Hin).
150mm (5.9in) reach p/n dBA0005
Bracket size is 175L x 100W x 150Hmm (6.9L x 3.9W x 5.9Hin).
Pulsar Fixed Angle Bracket for IMP and Transducers p/n 080A0008
Designed to allow fastening to a vertical wall or hatch where clear access to the target is available. Made of 'Hot Dipped Galvanised' steel with 2 x 14mm holes for wall fixing and a 22mm hole and slot for a transducer adapter to mount through. It has both a 61mm dia hole and a 49mm dia hole to mount the IMP3 or IMP6. Bracket size is 340L x 150W x 100Hmm.
Pulsar Fixed Angle Bracket for T-Comp and dB/dBi Transducer p/n dBA0006
Designed to allow fastening to a vertical wall or hatch where clear access to the target is available. The bracket is made from 'Hot Dipped Galvanised' steel with 4 x 12mm holes for wall fixing, a 22mm hole and slot for the transducer adapter and a 40mm hole to mount a remote temperature sensor and sunshield. Bracket size is width 200mm (7.9in) x height 102mm (4in) x length 250mm (9.8in).
Pulsar Hinged Transducer Bracket p/n dBA0003
Bracket Size: Length 716mm. Mountings at 223mm, 448mm and 663mm from wall.
Pulsar's hinged transducer bracket is an easy-mounting solution for any of the dB series transducers, providing a stable method of positioning a transducer above an application. The bracket is made from hot dipped galvanised steel and is hinged to allow the transducer to be swivelled up for cleaning or to allow access. The transducer can then be returned to the original position with no need to recalibrate.
The dB series transducer is mounted to one of the 22mm holes in the bracket using the 1" to 20mm adapter provided. If one of the inner holes is used and the excess bracketry removed, the retaining thro-nut with the steel pull cable attached easily slides to a new position. The bracket is supplied with the plastic channel seal.