Cable Options
Transducer cable lengths are supplied as a standard in 5m, 10m, 20m or
30m. Longer lengths can be supplied as required in 10m steps. It is
important to note that the supplied transducer cable may be extended by
using standard 2 or 3 core screened cable for up to 1000m or beyond if
needed. No separation is required between transducer and other cables
as it is not susceptible to crosstalk and significant costs can be
saved on site.
Aiming Kit
Pulsar’s robust and effective aiming kit allows the transducer to be
aimed towards the material draw off point at the bottom of the silo or
tank, ensuring that the returning echo is as strong as possible and
that the ultrasonic system is able to measure right down to the true
empty point of the silo. The location of the aiming kit should be as
far away from the fill point as possible to avoid seeing falling
material. It should be aimed to coincide with the material’s angle of
repose, ensuring a more powerful signal return to the transducer. The
rotational ball mechanism allows up to 20 degrees off vertical and 360
degrees of rotation.
Features
Allows rotation to suit silo conditions
Coincide with angle of repose of material being measured
Follow material level down to draw off point
Easy aim and lock system
Blind Flanges
A range of blind PVC flanges with central 1" BSP or NPT hole is
available. These are for mounting transducers within a stand pipe or
tank using the rear thread or dB3 front thread mounting. These available in
2", 3", 4" and 6" ANSI or DIN 80, DIN 100, DIN 150 and DIN 200 patterns.
Angled Bracket
Pulsar Fixed Angle Transducer Bracket
Fixed angle bracket made from steel with a BZP (bright zinc passivate)
coat. Ideal for mounting against a wall where there is an under-hang
under a manhole or similar. 2 x 14mm holes allow rigid fixing into a
vertical surface using suitable bolts.
Hinged Transducer Bracket
Pulsar’s hinged transducer bracket is an easy-mounting solution for any
of the dB series transducers, providing a stable method of positioning
a transducer above an application. The bracket is made from hot dipped
galvanised steel and is hinged to allow the transducer to be swivelled
up for cleaning or to allow access. The transducer can then be returned
to the original position with no need to recalibrate.